Reznor UDAP Bedienungsanleitung PDF herunterladen (Seite 2)

Form P-UD, Page 2

Rating Plate and Serial No.

Example of a Rating Plate, Model UDAP

Example of a Rating Plate, Model UDBP

REZNOR

MERCER, PA. USA 16137

MADE IN MEXICO

UNIT HEATER NRTL

CATEGORY [ Z ]

ANSI Z83.8 [ A ] CSA 2.6 [ A’ ] UNIT HEATER

CSA .10.96 U.S. (2nd Ed.) UNIT HEATERS FOR RESIDENTIAL INSTALLATION

MODEL [ B ] [ C ]

SERIAL NO. BBD 79 X7 N 00000

[ D ] VOLTS [ D ] PH [ D ] HZ MAXIMUM TOTAL INPUT [ D ] AMPS

TYPE OF GAS: [ E ]

FOR USE AT 0-2000 FEET, 0-610 METERS OF ALTITUDE.

ORIFICE SIZE [ F ] DRILL HAS BEEN FACTORY ADJUSTED

SEA LEVEL

NORMAL INPUT [ J ] BTU/HR

THERMAL OUTPUT CAPACITY [ L ] BTU/HR

MINIMUM INPUT(-2 MODELS) [ M ] BTU/HR

NORMAL MANIFOLD PRESSURE [ G ] IN.W.C.

MIN. PERMISSIBLE GAS SUPPLY PRESSURE

FOR PURPOSE OF INPUT ADJUSTMENT. [ H ] IN.W.C.

CLEARANCES TO COMBUSTIBLE CONSTRUCTION: TOP-[ N ] “,

FLUE CONNECTION-6”, CONTROL SIDE-18”, OPP. SIDE-[ P ] “,

BOTTOM-1”, FRONT-36”.

FOR ALTERNATE INSTALLATIONS USE THE LATEST EDITIONS OF

THE APPROPRIATE STANDARD LISTED BELOW:

FOR AIRCRAFT HANGARS USE STANDARD ANSI/NFPA 409

FOR PARKING STRUCTURES USE STANDARD ANSI/NFPA 88A

FOR REPAIR GARAGES USE STANDARD ANSI/NFPA 88B

THIS UNIT IS NOT FOR USE WITH DUCTS.

THIS UNIT IS NOT FOR USE WITH FILTERS.

IN THE EVENT THE FLAME ROLLOUT SENSOR CAUSES THE

HEATER TO SHUT OFF, DETERMINE AND CORRECT THE CAUSE.

FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY OR

DEATH. TO RESET, DEPRESS THE BUTTON ON THE SENSOR

LOCATED ON THE BURNER BOX ASSEMBLY.

REZNOR

MERCER, PA. USA 16137

MADE IN MEXICO

NRTL

UNIT HEATER

CATEGORY [ Z ]

ANSI Z83.8 [ A ] CSA 2.6 [ A’ ] UNIT HEATER

MODEL [ B ] [ C ]

SERIAL NO.

[ K ] HP

[ D ] VOLTS [ D ] PH [ D ] HZ MAXIMUM TOTAL INPUT [ D ] AMPS

TYPE OF GAS: [ E ]

FOR USE AT 0-2000 FEET, 0-610 METERS OF ALTITUDE.

ORIFICE SIZE [ F ] DRILL

NORMAL INPUT [ J ] BTU/HR

THERMAL OUTPUT CAPACITY [ L ] BTU/HR

MINIMUM INPUT(-2 MODELS) [ M ] BTU/HR

NORMAL MANIFOLD PRESSURE [ G ] IN.W.C.

MIN. PERMISSIBLE GAS SUPPLY PRESSURE

FOR PURPOSE OF INPUT ADJUSTMENT. [ H ] IN.W.C.

TEMPERATURE RISE RANGE FROM [ Q ] DEG. F. TO [ R ] DEG. F.

MAXIMUM EXTERNAL STATIC PRESSURE [ S ] IN. W.C.

CLEARANCES TO COMBUSTIBLE CONSTRUCTION: TOP-[ N ] “, FLUE

CONNECTION-6”, CONTROL SIDE-18”, OPP. SIDE-[ P ] “, BOTTOM-1”, FRONT-36”

FOR ALTERNATE INSTALLATIONS USE THE LATEST EDITIONS OF THE

APPROPRIATE STANDARD LISTED BELOW:

FOR AIRCRAFT HANGARS USE STANDARD ANSI/NFPA 409

FOR PARKING STRUCTURES USE STANDARD ANSI/NFPA 88A

FOR REPAIR GARAGES USE STANDARD ANSI/NFPA 88B

INSTALLATION OF THIS UNIT IN AIRCRAFT HANGERS IN ACCORDANCE WITH

THE REQUIREMENTS OF THE ENFORCING AUTHORITIES AND IN PUBLIC

GARAGES IN ACCORDANCE WITH THE CAN/CGA-B149 (.1 OR .2 ) CODES.

THIS UNIT IS NOT FOR USE WITH FILTERS.

THIS UNIT MAY BE USED WITH DUCTS.

Rating Plate Key:

A Date of ANSI Standard K Blower Motor Horsepower

A’ Date of CSA Standard L BTU Thermal Output Sea Level

B Model No. M BTU Minimum Input Sea Level

C Month and Year of Manufacture N Top Clearance

D Voltage, Phase, 60 Hertz, Maximum Total Input Amps P Left Side Clearance

E Natural or Propane Gas Q Temperature Rise From (°F)

F Orice Size R Temperature Rise To (°F)

Manifold Pressure (3.5” w.c. Natural Gas; 10” w.c.

Propane Gas)

Maximum External Static Pressure (inches

w.c.)

Minimum Gas supply Pressure (5.0” w.c. Natural Gas;

11.0” w.c. Propane Gas)

Z Category

J BTU Normal Input Sea Level

1 2 3 4 5 6 7 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Reznor UDAP Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Raumheizungen Reznor UDAP