
3
IMPORTANT SAFETY INFORMATION
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are
used frequently throughout this manual to designate a
degree or level of seriousness and should not be ignored.
WARNING indicates a potentially hazardous situation that
if not avoided, could result in personal injury or death.
CAUTION indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
WARNING:
PROPOSITION 65 WARNING: This product
contains fiberglass wool, a product known to the
stateofCaliforniatocausecancer.Disturbing
theinsulationofthisproductduringinstallation,
maintenance, or repair will expose you to
fiberglass wool.
• Breathingthismaterialmaycauserespiratory
irritations or may cause lung cancer.
• Fiberglasswoolmayalsocauseeyeirritation,
skin sensitization, or other allergic responses
in susceptible individuals.
• Always wear goggles, disposable gloves,
long sleeved shirt, and appropriate breathing
protection when working near this insulation.
Ifcontactwithskinoccurs,washimmediately
with soap and water. In case of contact with
eyes,ushimmediatelywithwaterforatleast
15minutes.Contactaphysicianifneeded.
WARNING:
The information listed below and on the next
pagemustbefollowedduringtheinstallation,
service,andoperationofthisunit.Unqualied
individuals should not attempt to interpret these
instructions or install this equipment. Failure
tofollowsafetyrecommendationscouldresult
in possible damage to the equipment, serious
personal injury or death.
• Before beginning the installation, verify that the unit
model is correct for the job. The unit model number
is printed on the data label. Follow all precautions in
the literature, on tags, and on labels provided with
the equipment. Read and thoroughly understand
the instructions provided with the equipment prior to
performing the installation and operational checkout
of the equipment.
• Never test for gas leaks with an open ame. Use
a commercially available soap solution to check all
connections. See page 14.
• Installationofequipmentmayrequirebrazingoperations.
Installer must comply with safety codes and wear
appropriate safety equipment (safety glasses, work
gloves, fire extinguisher, etc.) when performing brazing
operations.
• This equipment is NOT to be used for temporary heating
of buildings or structures under construction.
• Usecautionwhenhandlingthisapplianceorremoving
components. Personal injury can occur from sharp metal
edges present in all sheet metal constructed equipment.
WARNING:
ELECTRICAL SHOCK, FIRE OR
EXPLOSION HAZARD
Failuretofollowsafetywarningsexactlycould
result in serious injury or property damage.
Improper servicing could result in dangerous
operation, serious injury, death or property
damage.
• Beforeservicing,disconnectallelectricalpower
to the equipment.
• Whenservicingcontrols,labelallwiresprior
to disconnecting. Reconnect wires correctly.
• Verifyproperoperationafterservicing.
WARNING:
These units are fully charged with R-410A
refrigerant and ready for installation. When
a system is installed according to these
instructions,norefrigerantchargingisrequired.
Ifrepairsmakeitnecessaryforevacuationand
charging, it should only be attempted by qualified,
trainedpersonnelthoroughlyfamiliarwiththis
equipment. Some local codes require licensed
installation service personnel to service this
type of equipment. Under no circumstances
should the homeowner attempt to install and/or
service this equipment. Failure to comply with
this warning could result in equipment damage,
personal injury, or death.
WARNING:
Do not place combustible material on or against
the unit cabinet. Do not place combustible
materials, including gasoline and any other
ammablevaporsandliquids,inthevicinityof
the unit.
Kommentare zu diesen Handbüchern